A&D AD-8922A Manual de Instruções descarregar pdf (Página 31)

１１-３-２ Recalling the upper and lower limit values

The procedure below describes an easy way to recall the upper and lower limit values to be used for

weighing.

1 While pressing and holding the ON:OFF key, press the MODE key to enter the selection mode.

2 The upper limit value last selected with its comparator number appears.

3. Select the comparator number using the following keys.

RE-ZERO key To increase the comparator number by 1.

MODE key To decrease the comparator number by 1.

Each time the key is pressed, the upper limit value and the lower limit value of the comparator

number selected is displayed alternately. (

C01 HI ⇔ C01 LO ⇔ C02 HI ⇔ C02 LO ⇔…)

Only the stored comparator numbers are displayed.

4 Press the PRINT key to confirm the selection and return to the weighing data display with the

selected upper and lower limit values ready for use (In the example shown below, the values of

C08". )

Note: When no operation is performed in step 4 (after a few seconds of inactivity), the AD-8922A

selects the value currently displayed and returns to the weighing data display

automatically.

To cancel the operation, press the CAL key.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 41 42

Sem comentários

A&D AD-8922A Manual de Instruções Página 31