A&D OP-05 Especificações descarregar pdf (Página 27)

CHAPTER 6 GENERAL FUNCTIONS

The general functions determine the operations of the AD-4401 and are all stored in the EEPROM. Each function is

sorted into the groups by capabilities and represented by prefixing a function number (F-XX) with its group name. This

chapter describes how to set the general functions and their details. For functions related to options, see the descriptive

sections for the options.

SETTING METHOD

Step 1 With the [ENTER] key pressed and held, press the [SETPOINT] key. “Fnc” is displayed to inform you that

the indicator is entering the general function mode.

• Note: When you did not want to enter the function mode, press the [ESC] key. The indicator will return to the

normal mode.

Step 2 Press the [ENTER] key. The indicator will switch to the general function mode and the cursor appears at

the letter, “c”.

Step 3 Select the target function group, using the [ ∧ ] , and [ ∨ ] keys

After selecting the function group, press the [ENTER] key. (In this example, select Basic Capabilities

Related)

The main display section displays the function number and the cursor appears in the lowest digit. The

Subdisplay section displays a set value for the function.

Group Name Symbol

Basic Capabilities Related Fnc

Weighing Sequence Related Sq

Control I/O Input Related in

Control I/O Output Related out

Standard Serial Output Related si

Parallel BCD Output Related bcd

RS I/O Related rS

Setpoint Value input Related SP

Analog Output Related An

Step 4 Using the [<], [>], [ ∧ ] , and [ ∨ ] keys, select the function number you want to set. In this example, select

FNCF-02. For your information, FNCF-02 is a capability of the [F] key.

Step 5 In this example, set the [F] key to a “print command.” Press the [ENTER] key. The Subdisplay section

starts blinking.

Step 6 Press the [ ∧ ] key. The Subdisplay section displays “1”.

Step 7 Press the [ENTER] key. The main display section starts blinking and you are returned to Step 4, selection

of the function number.

Step 8 Press the [ESC] key. The function number disappears and you are returned to Step 2.

Step 9 Press the [ESC] key again. The settings so far are saved in the EEPROM and the indicator is returned to

the normal mode.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 89 90

Sem comentários

A&D OP-05 Especificações Página 27