A&D OP-11 Manual de Instalação descarregar pdf (Página 89)

07/2011 2 Operating A&D DataManagement

2.5 HD component

SIMATIC A&D DataManagement Client - 07/2011

2-89

Selecting the network protocol

If the computers are physically connected, select the corresponding network

protocol as follows:

1. Under Start → Settings → System control → Network, set the ADDM

computer as a Client for Microsoft networks.

2. On the ADDM computer, set the same network protocol as on the

computer to be backed up.

If you save the ADDM project on a high-availability network server, this

must also support the same network protocol.

Installing NetBEUI for a Windows XP system

If you use a ServicePC with Windows XP, the "NetBEUI" protocol must be post-

installed.

You can find a description of how to do this at:

http://support.microsoft.com/kb/301041/en-us

Boot disk for use with ADDM

The following example describes a boot disk for communication via the "NetBEUI”

protocol.

This is then adjusted for use with ADDM.

The "AUTOEXEC.BAT” file on your boot disk must contain the contents of the

"ADDM_Net.bat” batch file created by ADDM.

1. To do this, write the following content into the lines of the generated

"Autoexec.bat" file from the entry a:\net\net start:

@echo off

strings ADDMNAME = ask Please insert the name of your

ADDM-Computer:

strings USER = ask Please insert your User-Name:

net\net start

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 181 182

Sem comentários

A&D OP-11 Manual de Instalação Página 89