A&D TM-2564G Manual de Instruções descarregar pdf (Página 24)

4-3 Installation Procedure

Warning

• Do not use damaged cables and sensors.

• Use the specified cables and sensors only.

• The ECG unit is protected against defibrillator discharge only when the

supplied ECG extension cable is used.

1. Confirm that the power switch is turned

off.

2. Connect the cuff hose to the CUFF

connector of the instrument. Use the

1.5-m hose to extend it, if necessary.

3. Connect the SpO

extension cable to the

SpO

connector of the instrument and

lock it.

4. Connect the SpO

cable to the SpO

extension cable.

5. Connect the ECG extension cable to the

ECG connector of the instrument.

Confirm that it is securely connected.

6. Connect the ECG patient cable to the

ECG extension cable.

4-4 Printer Paper Loading Procedure

1. Press the printer cover open switch to

open the printer cover.

2. Load the printer paper as shown in the

illustration, and close the cover.

3. Press the FEED key to check that the

paper is fed properly.

4. Cut the leading edge of the printer paper

at a right angle.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 61 62

Sem comentários

A&D TM-2564G Manual de Instruções Página 24